short-circuiting

英 [ˌʃɔːt ˈsɜːkɪtɪŋ]

美 [ˌʃɔːrt ˈsɜːrkɪtɪŋ]

v.  (使)短路; (做事)抄近路，走捷径
short-circuit的现在分词

柯林斯词典

• V-ERG (使)短路
  If an electrical deviceshort-circuitsor if someone or somethingshort-circuitsit, a wrong connection or damaged wire causes electricity to travel along the wrong route and damage the device.
  1. Carbon dust and oil build up in large motors and cause them to short-circuit...
     碳尘和燃油在大发动机里越积越多，造成了发动机短路。
  2. Once inside they short-circuited the electronic security.
     一旦置入，它们就会使电子安全设施短路。
  3. Short-circuitis also a noun.
     
  4. The fire was started by an electrical short-circuit.
     火灾是由电线短路引发的。
• VERB 回避，绕过（某一流程或程序)
  If someone or somethingshort-circuitsa process or system, they avoid long or difficult parts of it and use a quicker, more direct method to achieve their aim.
  1. The approach was intended to short-circuit normal complaints procedures.
     这种方法旨在避开正常的投诉程序。

双语例句

• Multivariate statistical process control for on line monitoring of short-circuiting GMAW
  短路GMAW焊在线质量监测的多变量统计过程控制方法
• The weld quality under different welding conditions is related to the welding parameters which are inherent electrical parameters in the welding process itself, i.e. welding current, welding voltage, arc sound, short-circuiting frequency and so on.
  不同工艺条件下的焊接质量的好坏，肯定会反映在与焊接过程本身固有的焊接工艺参数上，如焊接电流、焊接电压、电弧声压、熔滴过渡频率等等。
• A arc parameter-measuring system was developed to analyze the process of short-circuiting arc welding and the effect of arc energy on the welding stability.
  为了分析短路过渡电弧的焊接过程和探讨电弧能量对焊接稳定性的影响，设计了短路过渡电弧电参数检测系统。
• The direct current reactor is used in order to obtain favorable dynamic property and attain the request of short-circuiting transfer to welding power supply, which makes the welding machine obtain excellent welding performance.
  为获得良好的动特性，达到短路过渡对焊接电源的要求，加入了直流电抗器，从而使焊机具有良好的动特性，获得优良的焊接工艺性能。
• The Finnish phone maker has received around 100 reports of its phones short-circuiting while being charged.
  芬兰手机制造商已经收到大约100份由于手机短路而被起诉的报告。
• The rule of the arc-time and short-circuiting transfer cycle time under the high speed welding was researched by welding quality analyzer of Hannover.
  采用汉诺威焊接质量分析仪，研究了在高速焊接的情况下，燃弧时间与短路过渡周期的变化规律。
• Some pharmaceutical companies are experimenting with other types of additives with the aim of short-circuiting bacteria's defenses.
  一些制药公司也在试验其它类型的添加剂，旨在破坏细菌的防御体系。
• Influence of dynamic electromagnetic force on stability of short-circuiting transfer in GMAW
  电磁力动态变化对短路过渡稳定性的影响
• You might recognize blow a fuse as a term describing short-circuiting of some kind, because of the word fuse
  你可能会觉得是一个描述电路短路的词，因为fuse
• Computer simulation on arc welding short-circuiting transfer process and current waveform control
  弧焊短路过渡过程及其电流波形控制的计算机仿真